DEDICATED PRESSURE SYSTEMS LTD. Telephone 01372 803 675 Fax 01372 803 678 Email dps@heatweb.com  Internet http://www.heatweb.com R/O Shops, 9-19 Manor Green Road, Epsom, Surrey KT19 8RA

Installation Instructions District Heating Stowaway 3708-1  29/03/01

Heat Bank Thermal Store System   Stowaway advanced F+E   14 Plate Heat Exchanger (30 ltr/min)   Indirect   40mm Foam Insulation   Fitted Cylinder Thermostat (Only)   All fitted controls are wired   Manual Fill - No Overflow   Thermostatic Blending Valve 22mm   Backup Immersion Heater   Low Water Level Indicator   Cased   Supplied with X100 Inhibitor   1   Integral Expansion Vessel (Unpressurised) 2   Plate Heat Exchanger 3   Heat Exchanger Pump 4   Flow Switch 6   Manual Air Vent 7   Automatic Air Vent 8   Integral Overflow Chamber 9   Store Filling Point 11  Y-Pattern Strainer (supplied loose) 13  Connection to Expansion Vessel 14  Immersion Heater 3kW Incaloy with Stat 16  Cold Mains In, 22mm 17  Hot Mains Out, 22mm 18  Drain Cock 21  Flow to Primary Coil 22  Return from Primary Coil 38  Cylinder Immersion Thermostat 39  White Coated Steel Casing 40  Tight Fitting Lid 42  Wiring Centre 54  Filling Loop (disconnect after use) 55  Water Level Switch 56  Manual Water Level Test and Drain 63  Sentinel X100 Corrosion Inhibitor 66  Overfill Drain Cock   Unit ID SC-190-3708-1 Capacity 190 Base Diameter 450 Overall Diameter 530 Height 1500

Contents: 1. Introduction 2. General Requirements 3. Mains Water Supply 4. Connections: 5. Wiring 6. Filling 7. Commissioning 8. Fault Finding 9. Servicing 10. Spares 11. User Instructions